TracPhone V7
2
Elevation Limit Switch Replacement Instructions
c.
Using needle-nose pliers, disconnect the two wires
from the limit switch terminals. Grasp the wires at the
terminal connectors to avoid damaging the wires.
Figure 2 Disconnecting the Limit Switch Wires
d.
Using a #1 Phillips screwdriver, remove the two #4-40
screws and flat washers securing the limit switch to the
mounting plate (see Figure 3).
Figure 3 Detaching the Limit Switch from the Mounting Plate
Terminal
Connector
Limit
Switch
Do not detach the limit switch mounting plate from the
antenna frame (see Figure 4 on the next page).
IMPORTANT!
#4-40 Screw (x2)
Mounting Plate -
DO NOT REMOVE
