Chapter 3: Operating the system
Using a computer
31
Accessing the terminal from a remote location
To access the terminal, do as follows:
1. Set up the terminal as described in
2. Start the connection locally, e.g. from the Dashboard in the web interface
accessed by a computer connected to the terminal.
3. After starting the connection, note the IP address in ONGOING DATA
SESSIONS in the web interface. This is the IP address you must use afterwards
to access the terminal.
4. On the remote computer, open your web browser.
5. Enter the IP address of the terminal followed by colon and the port number
http://<ip address>:<incoming port>
.
• <ip address> is the address from step 3. above.
• <incoming port> is the port you defined in
Example:
If the IP address of the terminal is 161.30.180.12 and the incoming
port number defined in the Remote management page in the web
interface is 8080, enter
http://161.30.180.12:8080
.
You should now be connected to the terminal from your remote computer.
Summary of Contents for TracPhone FB150
Page 1: ...User s Guide TracPhone FB150...
Page 132: ......
