31
TracNet H60 Installation Guide
Terminating LMR-240 Cable
5.
Insert the end of the cable into the #2 end of the
CST-240 stripping tool. Then rotate the tool clockwise
around the cable until the tool turns easily. This
removes the cable jacket from the end of the cable,
exposing the braid and dielectric.
Figure 59: Stripping the Cable Jacket
Figure 60: Cable Stripped, Exposing Dielectric
6.
Using the DBT-U deburr tool, deburr and chamfer the
center conductor. Avoid nicking the aluminum tape
covering the dielectric.
Figure 61: Deburring the Center Conductor
7.
Gently flare the braid with your fingers.
Figure 62: Flaring the Braid
Summary of Contents for TracNet H60
Page 1: ...Installation Guide TracNet H60...
Page 2: ......
Page 39: ...37 TracNet H60 Installation Guide Wiring Diagram Appendix E Wiring Diagram...
Page 41: ......
