2
Connecting the Set-top Box
To install the Set-top Box, simply connect its
three cables (all are supplied in the kit).
NOTE: Also refer to the manufacturer’s manual that
comes with the unit.
a.
Connect the Ethernet cable from the Set-top
Box to the vessel network that is connected to
the Media Server (see Figure 3).
b.
Connect the HDMI cable from the Set-top Box
to any available HDMI input on the TV.
c.
Install the two AAA batteries (supplied in the
kit) in the remote control.
d.
Connect the supplied AC-DC adapter to the
vessel’s AC power supply (100-240 VAC),
but do NOT connect it to the Set-top Box
yet.
Don’t apply power to the Set-top Box
until directed in the next section.
Figure 3: Set-top Box Connections
LAN
AC-DC Adapter
100-240 VAC
Vessel Power
Set-top Box
TV
Ethernet
12V DC
HDMI
Use only the AC-DC adapter that is supplied
with the Set-top Box. Using a different
adapter could seriously damage the unit. The
Set-top Box draws 5.5 W max. power.
IMPORTANT!
