Setting up work
57
Adjusting the
rotor pitch
To achieve optimum crop pickup, the rotor pitch can be adjusted trans-
versely to the chassis.
Basic setting
The rotor pitch is adjusted via the positioning of the wheel axles. There
are five possible positions per axle.
Choose the following positions for the basic setting:
When adjusting the rotor chassis, note the “Left” information sticker on
the left-hand rotor chassis.
See »Fitting the rotor chassis«, page 52.
20 mm
20 mm
Tines
Collecting the crop
increases the distance
between the tines and the
ground.
0 mm
0 mm
Left rotor
Right rotor
