Operation
78
Adjusting the
swath width
By extending the rotors, the swath width can be adjusted to suit the
crop volume and the swath type using the double-acting hydraulic
control device on the tractor. This function applies to both the standard
and Hydro versions.
For adjustment of the swath width, the machine should be in the
headland position. Otherwise, the machine may be damaged.
For the Hydro version, the pilotbox must be switched off.
Raise the machine into the headland position using the tractor's
single-acting control device.
Use the tractor's double-acting hydraulic control device to increase
the pressure in order to extend the swath width.
Use the tractor's double-acting hydraulic control device to
decrease the pressure in order to reduce the swath width.
Driving on
headlands
The rotors can be raised for crossing swaths that have already been
harvested.
For the Hydro version, the pilotbox must be switched off.
Swing the machine into the headland position using the double-
acting hydraulic control device on the tractor.
Lower the rotor again, in order to create new swath.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
