8/02
21
11.0 Skim equipment
11.1 Manure skimmer
The manure skimmer (fig. 17) is suitable for both grassland and stubble. A special type for maize
is shown in fig. 18, this one has a rounded front edge and is suitable when there is a lot of surface
residue.
For ploughs with auto reset:
The skimmer is mounted to the plough as shown in fig. 19. The depth is adjusted by loosening the
bolts B. Working depth should be 3 - 5 cm.
The skimmers can be adjusted forwards and backwards by loosening bolts A. For easier
adjustment, it is advantageous to turn the plough to a half way position.
For ploughs with shearbolt beam:
The skimmer is mounted to the plough as shown in fig. 20. After loosening the bolt V, the depth of
the skimmers can be adjusted by means of the bolt Z and Y (right and left respectively), and
sideways by bolt W.
11.2 Trashboard
The trashboard (fig. 21) should be placed with the front edge close to the mouldboard, the rear
edge should be adjusted according to the ploughing depth.
There are two adjusting holes in the bracket for the trashboard, one for deep ploughing and one
for shallower ploughing. In addition, there are two slotted holes in the trashboard for additional
adjustment.
NB!
To avoid uneven furrows, all the equipment must be adjusted equally.
Summary of Contents for PL-100
