Preparations in the field
83
Preparations in the field
The following applies to all preparations for use:
•
You must observe the safety instructions when carrying out all
work
•
Secure the machine so that it cannot be started up accidentally and
cannot roll away
•
The machine must stand on a flat and stable surface and must be
supported on supporting legs during the work
•
The adjusted frame of the machine must stand parallel to the
ground
•
During the folding procedure, no persons or objects may be in the
slewing range of the frame or tools
The following applies when performing all operations:
> If necessary, release the bolts
> Make adjustments as desired
> Retighten any loosened bolts
Lengthways trans-
port attachment
Removing mountable
lengthways transport
attachment
Risk of crushing
There is a risk of injury through crushing when coupling and uncou-
pling the drawbar and transport wheels. The drawbar weighs about 25
kg and one transport wheel weighs roughly 40 kg.
Wear proper safety shoes
Wear proper safety shoes. They protect against injury.
Do not place feet under the drawbar
When working, you must under no circumstances place your feet be-
neath the drawbar or transport wheel. Secure drawbar so that it can
not fall down. If the drawbar or transport wheel falls down by accident,
this can result in injury.
Secure the drawbar
The drawbar must be held securely when coupling and uncoupling.
Ensure that you cannot be struck by the drawbar if it falls down by ac-
cident.
