Safety
17
Replace hydraulic hoses
Replace hydraulic tubes every three years. Hydraulic hoses can age
without any externally visible damage. Defect hydraulic lines can lead
to severe or fatal injuries.
Caution when cleaning with a high-pressure cleaner
The machine can be cleaned using either water or a steam jet. Only
use low pressure to clean bearings, fans, signal distribution boxes,
plastic parts and hydraulic tubes. Excessively high pressures can cau-
se damage to these parts.
Prior to welding work, disconnect the battery and generator
Prior to carrying out electrical welding work on the attached machine,
disconnect the tractor's battery and generator. This prevents damage
to the electrical system.
Tighten the screw connections
All screw connections released during maintenance and repair opera-
tions must now be retightened. Loose threaded connections can undo
without you noticing during your work. As a result, machine parts can
fall off. Severe injury to persons or damage to equipment can result.
Further regulati-
ons
Observe the regulations
In addition to these safety instructions, observe the following:
•
Accident-prevention regulations
•
Generally recognised safety regulations, occupational health re-
quirements and road traffic regulations
•
Instructions given in this operating manual
•
Operation, maintenance, and repair regulations
