Maintenance
90
Replacing the coulters
The specific beveled Knock-on tool must be used to replace the
coulters.
Dismantling
Beveled Knock-on tool
Hammer (1.5 kg -
3.3 Ibs
minimum)
Position the Knock-on tool on the upper part of the coulter.
Hit the other end with a hammer.
Insert the beveled part of the tool between the Knock-on support
and the transportation safety clip.
Very slightly pry open to free the coulter.
Assembly
Beveled Knock-on tool
Hammer (1.5 kg -
3.3 Ibs
minimum)
Place the end of the coulter point in the slot in the Knock-on tool.
Hold the Knock-on tool firmly taking care not to be pinched when
hitting.
Give two or three firm hits to the coulter with a hammer in the
direction of the blocking system to guarantee that the part remains
in the support.
\
DANGER
When being dismantled, the coulters may fall and
cause injury.
Consequently, before you dismantle these coulters:
Make sure that no part of your body is positioned under these
coulters.
Summary of Contents for CLC PRO
Page 8: ...Safety 8 ...
Page 9: ...Safety 9 Folding machines ...
Page 10: ...Safety 10 ...
