Presentation of the machine
36
Front mixer discs
•
Front Mixing Discs (FMD)
•
Curved discs are located on the first beam at the front of the
machine.
•
They are placed in front of the first row of tines to mix and
incorporate the straw debris into the earth upstream of the tines.
•
Characteristics:
•
One straight disc 450 mm (
18”)
in the center
.
•
450 mm (
18”) diameter curved discs.
•
The curved discs are placed every 300 to 320 mm (
12”
to
13”
).
•
Non-stop release safety system.
Distribution of
right and left
deflectors
Spiral deflectors may equip the lateral tines or all the tines of the
machine.
The optimal distribution of these deflectors depends on the accessory
type, working conditions (type of ground, depth, speed...), it needs to
be adapted during commissioning.
If required, it is possible to invert one or several pairs of deflectors in
order to improve mixing or leveling quality.
The factory set-up involves the mounting of deflectors by row. This
set-up promotes mixing and balance of soil flows.
Machines with
two
or
three
tine rows:
•
The exterior tines direct soil flows towards the interior.
•
First row of tines: All the deflectors are oriented to the left.
Deflectors spiraled to the left are used.
•
Second row of tines: All the deflectors are oriented to the right.
Deflectors spiraled to the right are used.
•
Third row of tines: We use deflectors spiraled to the right on the left
part of the machine and deflectors spiraled to the left on the right
part of the machine. This configuration has the effect of directing
the flow of soil to the center.
Summary of Contents for CLC PRO
Page 8: ...Safety 8 ...
Page 9: ...Safety 9 Folding machines ...
Page 10: ...Safety 10 ...
