29
Initial start up
Trigger Time settings
The
Trigger Time
is a safety function which works as a time out and which can be set to 1 second, 30
seconds, 5 minutes or none.
When the trigger is pressed the buttons of the IsoMatch Grip are enabled until the specified time out
occurs. After that the buttons are disabled until the trigger is pressed again.
Set the
Trigger Time.
Press the
Mode Number
field.
Trigger Time
Note:
In case there is no Trigger functionality
desired,
set the
Trigger Time
to none (
x
).
Summary of Contents for A136138200
