Kverneland a-drill, Operating Manual

Page: 7 / 115

Safety
7
Safety regulations
Maintenance
The brakes or vehicle immobilisation system must be engaged before
all interventions within the radius of the tractor - tool unit.
Wear safety gear (helmet, safety shoes, gloves, etc.) when changing
parts on the machine.
You are advised to be careful with all parts with sharp edges or
corners.
Before welding, disconnect the electric units and disconnect the
tractor alternator and battery.
Never direct the jet of high pressure cleaners directly onto the
bearings, the hydraulic hoses, electric units or other sensitive
components on the machine (risk of damage).
The jet may bounce back off some surfaces.
Hydraulic system
The hydraulic system is pressurised.
Identify the connectors using a colour code, as indicated in the user
manual, when intervening on the hydraulic system.
Incorrect connections and the reversal of functions could cause
serious injuries.
Before any intervention on the hydraulic system:

Block the folding extensions in their rest position.

Block the hydraulically controlled accessories in their rest
position.

Reduce the pressure.

Stop the tractor engine.