Kverneland a-drill Operating Manual Download

Page: 54 / 115

Delivery and assembly

Equipment available on

mounted machines

Rigid machines

End of Field sensor (A)

The end of field sensor stops distribution when you raise the machine

to turn. Distribution automatically restarts when you lower the

machine.



Adjust the sensor position so that the tractor upper link activates

the sensor when the machine is raised.



Attach all.

Radar sensor (B)

The radar system allows you to adapt the seed distribution flow to your

tractor speed.



Position the bracket on the front beam of the frame.



Insert the plate onto the bracket.



Position the washers and fix all.



Ensure that no objects (cables, hoses, coupling bar, etc.) enter the

radar detection field.

Never look directly at the radar detection head when

operating.

This could cause serious eye injuries.

Summary of Contents for a-drill




















































































































Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands

Kverneland a-drill, Operating Manual

Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands