Kvaser Memorator Pro 5xHS CB User’s Guide
6 (16)
3
Layout
Kvaser Memorator Pro 5xHS CB consists of a printed circuit board (PCB)
populated with components.
Figure 2: Top view of Kvaser Memorator Pro 5xHS CB
The power LEDs are placed on the bottom right (D401 and D407), with the CAN
LEDs are placed to the left (D402–D406 and D408–D412), see Figure 4 on
Page 7. The USB connector is placed to the left on the top side (CN201) and the
CAN connectors to the right on the top side (CN1701) and to the left on the bottom
side(CN1702). The SD card reader is placed on the top side (CN801).
The outline in Figure 5 on Page 8 also shows the four mounting holes which have a
diameter of 4.5 mm.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
