Kvaser Ethercan Light, User Manual, Page: 16 / 22

Kvaser Ethercan Light User’s Guide 16 (22)
5 Appendices
In this section you will find technical information about Kvaser Ethercan Light and
the device’s connectors.
5.1 Technical data
In Table 6 below you will find the Kvaser Ethercan Light technical specifications.
CAN Channels 1
CAN Transceiver TJA1051T (Compliant with ISO 11898-2)
CAN Bit Rate 40 kbit/s up to 1 Mbit/s
Time stamp resolution 100 µs
Max message rate 8000 msg/s
Error Frame Detection Yes
Error Frame Generation No
Silent mode No
PC interface Ethernet (using Power over Ethernet)
Ethernet interface Ethernet IEEE 802.3u 100BASE-TX
Ethernet connector Shielded RJ45 socket STP
Galvanic isolation Yes
Power Supply PoE (Power over Ethernet) IEEE 802.3af or
CAN +9 V to +35 V DC
Power consumption Typical 1.2 W
Software requirements Windows (Vista or later)
1
.
Hardware configuration Done by software.
Dimensions 35 x 165 x 17 mm for body incl. strain relief
Weight 120 g including cables and connectors.
Operating temperature −20
◦
C to +70
◦
C
Storage temperature −40
◦
C to +85
◦
C
Relative Humidity 0 % to 85 % (non-condensing.)
Table 6: Technical specifications.
5.2 CAN connector
Kvaser Ethercan Light devices that use the 9-pin D-SUB connector (see Figure 12
on Page 17) have the pinning described in Table 7 on Page 17.
1
For other operating systems, contact Kvaser support.
Kvaser AB, Mölndal, Sweden — www.kvaser.com