Kvaser BlackBird v2 User’s Guide
10 (21)
Figure 4: Some configurations are available under the Configuration tab in the
Kvaser Wi-Fi Pairing Tool.
Note that some PC firewalls may interfere with the automatic
detection of the newly configured Kvaser BlackBird v2 and needs
to be turned off to complete the last step, “Waiting for device to
respond via Wi-Fi”.
Now that the Kvaser BlackBird v2 has been successfully paired with the host PC,
you should remove the Kvaser BlackBird v2 from the USB port and apply power to
the CAN connector instead. The device will now turn up as a “Remote” device
inside the Kvaser Device Guide, see Figure 7 on Page 12.
For information about how to set up a WLAN connection to the Kvaser BlackBird
v2, see the Kvaser BlackBird Getting Started Guide.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
