manualshive.com logo in svg

Kvaser 73-30130-00351-4, User Manual, Page: 10 / 38

Share
Download
Kvaser 73-30130-00351-4 User Manual Download Page 10

Kvaser Memorator Professional User’s Guide

9 (37)

3

Kvaser Memorator Professional Hardware

In this section you can read more about the CAN channels, power supply, flash
disks, LED indicators, and external triggers.

3.1

Hardware installation

The Kvaser Memorator Professional may be inserted in any free USB socket on
the host computer. You do not need to switch the power off before inserting or
removing the device.

For the Kvaser Memorator Professional to communicate with the host computer,
the correct version of the Kvaser driver and firmware must be installed. The
firmware is downloaded and installed directly on the Kvaser Memorator
Professional and the driver is installed on the host computer. The latest version of
the driver and firmware can be downloaded from http://www.kvaser.com/download/.

The driver is installed by running the file

kvaser_drivers_setup.exe

.

For information on how to upgrade the firmware, see Chapter 5.7, Updating the
firmware, on Page 27.

The delivery package of Kvaser Memorator Professional contains:

•

Kvaser Memorator Professional.

•

Software and Driver CD, containing drivers for Windows; Kvaser Memorator
Tools; Kvaser CANKing, an easy to use CAN bus monitor; Drivers for
RP1210A, LabView and DIAdem; and Kvaser CANlib Software Development
Kit.

•

Kvaser Memorator Professional User’s Guide.

•

USB cable.

•

SD card.

For driver installation information, see the driver and hardware installation guide
which can be found at http://www.kvaser.com/download/.

3.2

USB connector

The Kvaser Memorator Professional has a standard USB type “B” receptacle
connector. Connect it to your PC using any high quality, USB 2.0 certified cable.
The maximum USB cable length is 5 meters (approx. 16.5 ft.). If you need a longer
cable, you can use USB hubs or USB extension cables with a built-in hub. By

Kvaser AB, Mölndal, Sweden — www.kvaser.com

Summary of Contents for 73-30130-00351-4







































Reviews:

No comments