SDD3 · Setup
Lock
The SDD3 is equipped with an option to lock the setup of
the dital control part. The SDD3 can be locked using four
arbitrary capital letters. When the SDD3 unit is locked, it is
not possible to change digital parameters. LEVEL meters and
delay settings are still visible.
Set the Lock password
To set the lock password enter the Lock menu, select the
Password
position and select set at the Lock function list,
press
ENTER
. Set the requested letter by rotating the encoder.
To jump to the next letter position press
ENTER
.
To exit renaming press
FUNC/EXIT
button.
The password must be set complete, with all 4 letters.
Password consists only of capital letters.
Lock now
When the password is set, the SDD3 can be locked
automatically using Autolock function, or manually using
Lock now function.
Autolock
Automatic lock function can be selected between 1min,
10mins, 1hour, or can be switched off. After this time, when
the SDD3 parameters are not being changed, the SDD3 unit
is automatically locked.
Unlock
When locked, the MENU is replaced with unlock screen.
To unlock, set the LOCK screen and set the correct password
letter by rotating the encoder. To jump to the next letter
position press
ENTER
. When all 4 letters are entered correctly,
the SDD3 will unlock..
Forgotten password
A forgotten password can be deleted by using the
RESET
switch at the back of the SDD3.
Pressing the RESET button
resets the SDD3 to factory default setup and all previous
memory settings will be deleted back to factory default!
14
SDD3 · S
etup
