L - Bass module
POWER
WWW.KV2AUDIO.COM
KV2 AUDIO, MANUFACTURED IN THE EUROPEAN UNION
230 VAC, 50/60 Hz
MAX 30WATTS
R
L
PHASE
PHASE
PHASE
PHASE
SUB EQ
ON
OFF
SUB MODE
MONO
L / R
LIM - T
FAST
SLOW
HI
OUTPUT
L
R
LOW
OUTPUT
L / MONO
R / MONO
INPUT
180˚
0˚
180˚
0˚
180˚
0˚
180˚
0˚
SERIAL NUMBER
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
THIS PANEL OR ANY ATTACHED COMPONENTS. NO OPERATOR SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2-Way Stereo Crossover
The primary function of the SAC2 is as a 2-way stereo crossover.
The Low Output is used as a stereo low pass signal for subwoofers. The Low Output should be
switched to LPF and the Left and Right outputs sent to the subwoofers.
The Hi Output is used as a stereo high pass signal for mid/hi loudspeakers. The Hi Output should be
switched to HPF and the Left and Right outputs sent to the mid/hi loudspeakers.
The built in VHD Line Drivers ensure the highest possible signal integrity over long distances.
Using the System
L - Hi/Mid module
R - Bass module
R - Hi/Mid module
R-Low Out
R-Hi Out
L-Low Out
L-Hi Out
R-Low
Out
R-Hi
Out
L-Low
Out
L-Hi
Out
L-Full Range
In
R-Full Range
In
SUB MODE
MONO
L / R
SAC2 Rear view
Power
amplifier
Page | 11
