SL3000D · Features · Rear panel
Rear Panel
Communication
5) Reset
Serves as factory reset button. Resets all setup, including network settings (default settings AutoIP/DHCP). Use a tool with
maximum diameter 2mm.
6) Status
LEDs indicates amplifier and amplifier diagnostics status, these are:
AMP
Dual colour LED. When green, it indicates that the power amplifier is powered up and all monitored parameters are OK.
When red, it indicates that amplifier is off, or some problem with the amplifier has occured, more information can be
obtained via Ethernet.
POE
When green, it indicates that the diagnostics unit is powered via Power over Ethernet device.
DHCP
When green, it indicates that the diagnostics Ethernet IP address is assigned from the DHCP server.
7) Ethernet connector
Serves as an external communication port supporting Ethernet standard, accepts RJ45, T-658B wiring. The SL3000D provides
web-server and SNMP (Simple network management protocol). When the Ethernet cable is connected and devices successfully
establish a connection, green LED is activated. When Ethernet communication is in progress, the orange LED flashes.
8) Speaker AP6 Connectors
Accepts a standard AP6 terminated loudspeaker cable for connecting up to a single SL412 cabinet. We recommend using
2.5mm/core cables
8
SL3000D · F
ea
tur
es · Rear panel
5
6
7
8
