VHD2.0 TOP ARM (KVV 987 309)
VHD Flyware · Description
Description
FLY BAR - 0003 (KVV 987 252):
The CROSSMEMBER hanging bracket is a flat and folded
steel bar with returned 90 degree ends.
This bracket attaches to the PICKPOINT ARM by simply
sliding into two preset grooves, from left to right and
secures smoothly and tightly, thus creating a T- Bar effect.
Once both bars are attached and joined, it is a simple case
of locking and securing the correct position and location,
according to which conguration of VHD enclosures are
being suspended, either in aLeft/Right unit, by inserting
a single D6 QUICK RELEASE PIN, which is attached via
a small shrouded steel tie at the return edge of the
PICKPOINT ARM. (See diagram).
VHD2.0 TOP EXTENSION ARM (KVV 987 306):
The VHD2.0 EXTENSION ARM is of the same design and presentation as the VHD2.0 TOP ARM, except it is differentiated by
being physically longer and employs a total of two angular wedges to allow locking into an attached secondary VHD2.0
and its enclosure handles.
The same method of inserting a single D6 QUICK RELEASE PIN into each handle is employed.
The arm has a poly-hex head at the top end of the bar, with prefixed apertures for the insertion of the D12.6 QUICK RELEASE PINS,
to allow desired splay angles of the secondary VHD2.0 and is attached by the insertion of a single D12.6 QUICK RELEASE PIN.
To add extra enclosures to the hang, this method of attachment is repeated.
VHD2.0 TOP EXTENSION ARM (KVV 987 306)
FLY BAR - 0003 (KVV 987 252)
VHD2.0 TOP ARM (KVV 987 309):
The VHD2.0 TOP ARM is a flat steel bar with straight ends, a double groove joint at the lower end and prefixed apertures to
accept both D6 and D12.6 QUICK RELEASE PINS.
A single bar is used on each side of an enclosure.
The bar employs a total of two angular wedges that are used to 'lock into' the handles on each side of the VHD2.0 enclosure
and are then secured by the insertion of a single D6 QUICK RELEASE PIN, (Which are attached to the bars via small shrouded
steel ties) into each handle.
Once the VHD2.0 TOP ARMS are attached to the VHD2.0, they are then simply attached to the CROSS MEMBER hanging
bracket by inserting a single D12.6 QUICK RELEASE PIN through the top aperture of both of the VHD2.0 TOP ARMS
and CROSSMEMBER hanging bracket.
VHD F
ly
w
ar
e · Description
16
