KV2 Audio ESR3000D, User Manual

Page: 9 / 24

ESR3000D · Features · Rear panel
Rear Panel
1) Main Input / Through Out
These are the input XLR connectors for channel A & B with associated 'Through Output' connectors for sending signal
to other devices.
2) Sub out Balanced XLR output connector
Sub out Balanced XLR output connector, crossed over LPF, used to connect additional subwoofers. The output is still active
even when FULL RANGE mode is activated.
3) PowerCon Power Connector
The ESR3000D Amplifier uses two connectors per two channel. Each connector supplies one channel. They accept standard
PowerCon terminated AC Mains cables.
4) Fans
The cooling fans operate continuously while the ESR3000D is on. An internal temperature sensor increases the speed of
the fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure to allow
adequate air flow to the front of the rack in which the ESR3000D is mounted.
1 2 3 4
7
ESR3000D · F
ea
tur
es · Rear panel