10
Troubleshooting:
Platter not rotating:
Check the belt.
Check mains connection.
Very slow start:
The belt tension may be out of range. Bring the motor tower away from the T base.
Remove platter and belt and check if the subplatter rotates smoothly.
Transportation:
For short distances remove the platter and belt and ensure that the cartridge is protected. Do
not over tilt the T base in case there is oil leakage from the turntable or some tonearms. Fix
parts so that they do not slide around during transport.
For longer transportation, however, parts should be replaced, in reverse order, into their
original packing, ensuring in particular that protection foam is inserted between parts such as
the subplatter, platter and T base. Be sure that the motor pulley is protected. See fig 3.
Kuzma Ltd
Hotemaze 17A
SI-4205 PREDDVOR
SLOVENIJA
P: + 386 4 25 35 450
F: +386 4 25 35 454
E mail:
www.kuzma.si
