20
21
EN
OPTIONAL
|
HOW TO USE THE CLEANING TOOL
HOW TO CLEAN SILICONE PARTS
Tip |
Tip |
Note |
Note |
11
4
2
3
Note |
Silicone Brush
Pull out the silicone brush from
the rotation wiper to clean.
After cleaning, insert into the slot
with the tail pointing down as
shown in the illustration.
Compression Silicone
Unplug to clean.
After cleaning firmly insert into the
slot below the pulp spout.
Silicone Ring
Remove the silicone ring from
strainer to clean.
After cleaning, push in the
silicone ring.
Smart Cap
Remove from the juice spout
to clean.
After cleaning, attach the smart
cap to the smart cap silicone on
the juice spout.
Clean the rotation wiper under running water.
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the compression
silicone and silicone ring are firmly inserted.
If the compression silicone and silicone ring are not firmly inserted, juice may leak from the
bottom of the juicing bowl.
Under running water, rotate the cleaning tool
and the strainer in opposite directions to clean.
Thoroughly rinse the inside and outside of
the strainer under running water.
After cleaning, remove the strainer from the
cleaning tool. Dry before storing.
The cleaning tool makes clean-up quick and easy.
Completely dry after cleaning.
Use the included cleaning brush to remove hard to reach bits after using the cleaning tool.
* The products illustrated/photographed in this booklet may vary slightly from the actual product.
Hold the cleaning tool with one hand and insert
the strainer into the cleaning tool.
Insert the strainer until you hear a click.
Summary of Contents for 61120035
Page 62: ......
