MUC IOM
3
|
P a g e
Multi Use Controller (MUC) IOM
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. The proper installation and
maintenance of this unit will allow the unit to deliver years of dependable service. Read
carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage!
Installation and maintenance are to be performed only by qualified personnel who are
familiar with local codes and regulations and who are experienced with this type of
equipment. Personnel should have a clear understanding of these instructions and
should be aware of general safety precautions.
DANGER!
Always disconnect, lock and tag power source before installing or servicing.
Failure to disconnect power source can result in fire, shock or serious injury.
CAUTION!
Consult and follow all applicable national, state and local codes. They will
supersede this document.
WARNING!
No installation, use or maintenance should be done in an explosive or
hazardous environment.
Introduction
The Multi Use Controller (MUC) is an intelligent easy to install wall mounted device that
is a constant speed controller used to safely exhaust or provide supply air to gas or
solid fuel fired fireplaces and heating appliances. Designed for use with electronically
commutated motors (ECM), the MUC meets all code requirements for NFPA211,
NFPA54, IFGC2012, IMC2012 and UMC2012
Features include:
User control via Integrated slide switch 0-10 VDC potentiometer to control a draft
inducer or power venter
Enable input for remote operation
Code compliant safety mechanism designed for ECM fault protection
Visual and audible alarm if the controller detects a problem with the fan
Includes an integrated safety function to verify the pressure is negative or if the
motor is functioning properly as required per national and local codes
Device status indicators via a green LED and red LED as well as an audio
buzzer that can be muted
Includes a battery back-up if the control loses power
Note:
Information contained within this manual may be updated without notice.
