Page 1: ......
Page 2: ...r cabinet Minimum requirements 8 16 Ohms 12 Watts RMS or more NOTE 1 The internal speaker is disconnected when the external speaker jack is used 2 Using a speaker below the recommended 8 16 Ohms will damage the circuitry of your amplifier 12 Line Output This jack will deliver a line level output Approximately 1 VRMS Maximum 1K ohm Congratulations on the purchase of your new Kustom amp Your new Tub...
Page 3: ...ooth distortion can now be heard Adjust HIGH to set the amount of bite The SHIFT button may also be activated to emphasize midrange frequencies for a fuller tone High Gain Rock This setting utilizes increased gain to provide a heavier sound loaded with crunch and sustain GAIN ON and SHIFT are both activated for maximum impact Adjust LOW and HIGH to match the tonal character of your guitar CLEAN SE...
Page 4: ...power supply cord 10 Power supply cords should always handled carefully Never walk or place equipment on power supply cords Periodically check cords for cuts or signs of stress especially at the point where the cord exits the unit 11 The power supply cord should be unplugged when the unit is unused for long periods of time 12 If this product is to be mounted in an equipment rack rear support shoul...
