PA55
/
BT
Control Panel
11
1
9
2
7
8
3
4
4
5
5
12
6
10
6
PA55
/
BT
v
13
o
BLUETOOTH PAIRING
INSTRUCTIONS:
To connect your Bluetooth device to the
Kustom
Bluetooth receiver for the first
time, navigate to the Bluetooth settings
menu on you Bluetooth enabled device.
Ensure that Bluetooth is enabled and
your
Kustom
product is powered on.
Perform a scan for available devices.
Select and pair to the
Kustom
product in
the list of available devices. Enter 0000
for the passcode if prompted. Once
paired, a connection can be established.
Depending on the device, future
connections may be established
automatically when a previously paired
Bluetooth device is in range of the
Kustom
Bluetooth receiver.
The Bluetooth receiver in
Kustom
Bluetooth products is an A2DP device
and will work with other A2DP
compatible Bluetooth devices including
most smart phones. Additional
hardware and/or driver software may be
required for computers with integrated
Bluetooth adaptors due to a lack of
support for A2DP devices by some
operating systems.
A2DP protocol only allows for one to
one device connections. Therefore, only
one Bluetooth device can be connected
to a
Kustom
Bluetooth product at one
time. Similarly, a Bluetooth device can
only be connected to one
Kustom
Bluetooth product at one time. Plugging
a 1/8” connector into the AUX jack
disables the
Kustom
Bluetooth receiver.
