Kustom PA4EX, Owner'S Manual

Page: 5 / 6

Here are some examples for setting up the PA4EX to enhance your live sound.
SYNC Circuit of
Any PA Product
SYNC
SYNC
Acoustic Instruments
With Active Preamps
Passive Instruments
With 1/4” Output
Powered
Speaker
or
Powered
Monitor Powered
Speaker
or
Powered
Monitor
Preamp/DI for
Tone Shaping
(Optional)
Line Level Audio
Mic
HOOKUP DIAGRAM
PRODUCT WEIGHTS & DIMENSIONS
PA4EX Specifications
Accepted Inputs Mic XLR Balanced, Line Level 1/4" Unbalanced Nominal line level of -10 dBV.
Frequency Response 48 Hz to 23 kHz Channel volume knobs set at 3/4 full scale
Signal to Noise Ratio 74 dB
All controls set at maximum, output at maximum
unclipped level, bandwidth 22 kHz
System Gain @ 1 kHz
21 dB Line input to master output
38 dB MIC input to master output
Channel EQ (high, low) 2.6 kHz and above, 0.9 kHz and below Low boost/cut: +/- 9.8 dB at 63 Hz
High boost/cut: +/- 7.0 dB at 8.0 kHz
SYNC
IN: Accepts a pre-master volume signal from
another PA4EX or PA50/100/150product, or a line
level input from another audio product.
Recommended use: Daisy chaining to another PA4EX
for expanding the number of channels.
OUT: Exports a pre-master volume signal to
another PA4EX or PA50/100/150product.
Recommended use: Linking to any PA50 / PA100 /
PA150 powered speaker or daisy chaining to another
PA4EX.
Phantom Power 17 V Available on all MIC inputs. Current limited to 5 mA.
Power Requirements 18 Vdc Wall adapter is included.
2.2 lbs (including adapter)
9.75” (L) x 6.375” (W) x 2.375” (H)
1 kg (including adapter)
24.5 cm (L) x 16.2 cm (W) x 6.2 cm (H)