1. Wire the solenoid valve to the vehicle’s starting circuit. Be certain that the solenoid is
energized only while the vehicle is cranking and deenergized at all other times.
MAINTENANCE
The Air Eject is a precision device designed and manufactured for many years of reliable
service. Periodic servicing, cleaning and lubricating are important.
It is suggested that the cylinder assembly be inspected regularly and cleaned and lubricated
at a minimum once every six months.
In applications where contamination by water and road dirt are excessive, more frequent
servicing may be required.
Lubrication should be only with non-petroleum based lubricants such as Dow Corning DC-
4 Silicone grease, Silicone or Teflon spray.
WIRING
TO STARTER
SWITCH
STARTER
AIR
EJECT
TO CHASSIS
GROUND
_
+
BATTERY
TO CHASSIS
GROUND
WIRING AIR EJECT
STARTER
SOLENOID
