3.250 2.125
1.875
3/16”
DIA HOLE
2 1/4
” DIA HOLE
DRILL THESE TWO HOLES FIRST
1/2” DIA HOLE
C
L
L
C
C
L
L
C
Hole Template
AUTO EJECT
DYNAMIC DISCONNECT
AUTO EJECT
ENCLOSURE
MODEL # 091-18-098
The Model 091-18-098 Dynamic Disconnect is a
coupling device wired between an Auto Eject and the
vehicle and serves to only connect the A.C. power
after the plug has been inserted into the Auto Eject.
Upon vehicle startup the Dynamic Disconnect opens
the load circuit before ejecting the plug. By providing
the time delays on both application and removal of
power, no arcing can occur at the connector. Note
A.C. power must be present at the shore line connec-
tor in order to operate the Dynamic Disconnect.
The Enclosure is fabricated from aluminum and
contains a cutout and captive fasteners to mate with
the Auto EJect mounting screws. Providing protec-
tion from road dirt and damage, this unit suggested
for all Auto Eject installations in which the mecha-
nism is exposed to the elements or subject to
damage.
MODEL # 091-18CP
