Kusina G7I100E, Instruction Manual

Page: 2 / 11

DESCRIPTION

The instructions in this manual contain important information on the safe mounting, usage,
cleaning and maintenance of the device. Thus, keep the manual at a place easily accessible
by the person who will use the machine, and the technician.

Mounting, conversions for different gas groups or electrical inlet, and maintenance works of
the device should be performed by a specialist authorized in this subject and in accordance
with the instructions of the manufacturer company.

Gas and electrical connections of the device should be arranged according to the tables and
electrical diagram given in this manual.

Manufacturer company accepts no responsibility for the final damages that are caused by any
procedure not conforming to the instruction manual, or maintenance or technical
interventions that are not performed by authorized people.
MOUNTING INSTRUCTIONS

Installation and adjustment of the device should be carried out by experienced technical staff.

Place the device beneath a filtered exhaust hood in order to eliminate smell and fume that
may be emitted during cooking.

Device should be placed on a flat surface by suitably balancing on the four adjustable legs.
(Figure 01)

Place the device at least 10 cm away the side walls.

Remove the protective nylon on the device. Clean the adhesive particles left on the device
with a suitable cleaner.

Never leave flammable material near the device.
ELECTRICAL CONNECTION

Connect the device to the electrical installation according to the electrical standards of the
relevant country.

Feed the device with suitable voltage written on the information plate.

Connect to the electrical installation over a suitable automatic fuse. Fix the said fuse on a
place that is easily accessible in case of a danger.

The cable connecting the device to the electrical installation should be at least type H07
RNF.

Before connecting the electrical inlet cable to the inlet clamp on the device, connect the cable
by passing it through the inlet coupling. And then tighten the coupling cover in a manner that
does not allow cable return.

Electrical inlet clamp can be seen by disassembling front panel.

Electrical inlet is indicated with a label on the device.

If the device will be used in a commercial kitchen, apply a correct grounding system. Here,
consider DIN VDE D100 Article 540.

Grounding screw is indicated with a label behind the device.