Kusina 600 Series, Instruction And Maintenance Manual

Page: 2 / 11

DESCRIPTION

The instructions in this manual contain important information on the safe mounting, usage, cleaning
and maintenance of the device. Thus, keep the manual at a place easily accessible by the person who
will use the machine, and the technician.

Mounting, conversions for different gas groups or electrical inlet, and maintenance works of the
device should be performed by a specialist authorized in this subject and in accordance with the
instructions of the manufacturer company.

Gas and electrical connections of the device should be arranged according to the tables and electrical
diagram given in this manual.

Manufacturer Company accepts no responsibility for the final damages incurred in humans or
properties that are caused by any procedure not conforming to the instruction manual, or maintenance
or technical interventions that are not performed by authorized people.
TYPES

G6K100G – 600 serie ½ module counter top

G6K200G – 600 serie 1 module counter top

G7K100G – 700 serie ½ module w/ cupboard

G7K200G – 700 serie 1 module w/ cupboard

G7K201G – 700 serie 1,5 module w/ cupboard

G7K210G – 700 serie 1 module w/oven

G7K211G – 700 serie 1,5 module w/ cupboard and oven

G9K100G – 900 serie ½ module w/ cupboard

G9K200G – 900 serie 1 module w/ cupboard

G9K201G – 900 serie 1,5 module w/ cupboard

G9K210G – 900 serie 1 module w/oven

G9K211G – 900 serie 1,5 module w/ cupboard and oven

G9K212G – 900 serie 1,5 module w/ oven
MOUNTING INSTRUCTION
Placement

Installation and adjustment of the device should be carried out by technical staff of the Authorized
Service.

Place the device at a place min. 10cm away from the side or back wall to prevent excessive
temperature rises.

Place the device beneath a filtered exhaust hood in order to eliminate smell and fume that may be
emitted during cooking.

Device should be placed on a flat surface by suitably balancing on the four adjustable legs. (Figure A)

Remove the protective nylon on the device. Clean the adhesive particles left on the device with a
suitable cleaner.

Never leave flammable material near the device.
GAS CONNECTION

Device should be connected in accordance with the national and local gas standards of the relevant
country.

Gas inlets “G” of the device are indicated with a label on device body.

Connection to the gas installation should be made with flex pipe and ball valve. Fix the said ball valve
to a place that is away from heat and easily accessible in case of a danger.

After gas inlet connection is completed, check for possible gas leakages.