15
KÜSCHALL
ULTRA-LIGHT
© Küschall AG, Switzerland | 2014-07
Service Manual
BACKREST
Fitting height adjustable, rear set push handles
Difficulty:
Tools:
Ò
Ã
3, 4, 5
8, 10
The Velcro
®
bands may have to be replaced with narrower ones, as
space is required to secure the holder on the telescopic tube.
Secure the telescopic tube
to the rear frame
at the required
height.
Press the cover cap
onto the end of the telescopic tube.
Push the Velcro
®
bands
onto the telescopic tube.
Push the holder
onto the telescopic tube and fix in place by
tightening the clamp bolts.
Fit end band
onto the telescopic tube and secure with a bolt.
Attach protective cushion.
Fitting angle-adjustable backrest with height-adjustable
push handles
Difficulty:
Tools:
Ò
Ã
3, 4, 5
8, 10
10
Shorter rear frame (variant III) required.
Push the lower joint pin
into the rear frame
and fix it using
the bolts.
Fit backrest tube
onto the upper joint pin
using bolts.
Assemble the upper and lower joint pins
and
and secure
with a bolt
.
Set the desired backrest angle and secure in the nearest hole
using a nut and bolt
.
Retighten the bolt
.
Push the single Velcro
®
band
and then the other Velcro®
bands
and end band
over the backrest tube
.
Push in push handle completely.
Using the clamp bolt
a
fit the height-adjustable push handles
through the telescopic tube
.
Fit end band
onto the telescopic tube
with a bolt.
1
3
2
5
6
4
1
2
3
4
5
6
9
10
8
7
11
à
13 Nm
à
13 Nm
