6.9.3 Installing the posture belt
Allen key (5 mm) / Socket spanner (10)
■■□
1.
Remove cap nut
A
and washer
C
.
2.
Attach the steel strap
D
to the backrest joint screw
B
using the supplied, new cap nut and washer.
A
= 7 Nm
WARNING!
Risk of injury due to incorrect installation
– Make sure that the webbing of the posture belt is not
twisted during assembly and the locking mechanism shows
towards the front.
WARNING!
Risk of injury due to incorrect installation
– Make sure that the seat cover does not get caught
between the steel strap and the side supporters during
assembly.
6.9.4 Installing the positioning belt
Allen key (3 mm)
■□□
1.
Remove the two bolts
A
and washers
B
.
2.
Position the adapter plate
C
against the seat, aligning
the hole with the first frame hole, and the groove with
second frame hole.
If necessary, reposition the clamping part of the
parking brake.
WARNING!
Risk of injury due to incorrect installation
– Make sure that the parking brakes are positioned
correctly to ensure the function.
3.
Insert bolts with washers and tighten.
4.
Mount the belt
D
to the adapter plate
C
in the
required hole using bolt
E
and nut
F
.
The washer
G
can be placed between the belt
and the nut to avoid the rotation of the belt.
If necessary, reduce the length of the belt by
cutting straight across the belt at position
H
.
Trim along the curved line
I
for a proper
appearance.
A
= 5 Nm
D
C
A
B
G
F
B
E
A
B
A
B
A
H
I
6.9.5 Attaching the snap hook symbol labels
Before preparing the wheelchair for use as a seat in a motor vehicle, make sure that the configuration is suitable. In
doubt contact your Invacare representation.
1659339-A
41
