Küschall Compact, Service Manual, Page: 17 / 44

17
KÜSCHALL COMPACT
© Invacare Corporation | 2018-07
Service Manual
BACKREST
Fitting height adjustable, rear set push handles
Difficulty:
˜˜™
Tools: Ò Ã 3, 4, 5 8, 10
The hook and loop bands may have to be replaced with narrower
ones, as space is required to secure the holder on the telescopic
tube.

Secure the telescopic tube ‚ to the rear frame  at the required
height.

Press the cover cap † onto the end of the telescopic tube.

Push the hook and loop bands ƒ onto the telescopic tube.

Push the holder onto the telescopic tube and fix in place by
tightening the clamp bolts.

Fit end band „ onto the telescopic tube and secure with a bolt.

Attach protective cushion.
Fitting angle-adjustable backrest with height-adjustable
push handles
Difficulty:
˜˜™
Tools: Ò Ã 3, 4, 5 8, 10 10
Shorter rear frame (variant III) required.

Push the lower joint pin ‚ into the rear frame  and fix it using
the bolts.

Fit backrest tube † onto the upper joint pin ƒ using bolts.
Assemble the upper and lower joint pins
ƒ
and
‚
and secure
with a bolt „ .

Set the desired backrest angle and secure in the nearest hole
using a nut and bolt
.

Retighten the bolt
„ .

Push the single hook and loop band ˆ and then the other hook
and loop bands  and end band  over the backrest tube † .

Push in push handle completely.

Using the clamp bolt a fit the height-adjustable push handles ‡
through the telescopic tube † .

Fit end band  onto the telescopic tube † with a bolt.
1
3
2
5
6
4
1
2
3
4
5
6
9
10
8
7
11
„
à 13 Nm
à 13 Nm