Champion
Unfolding the wheelchair
1.
Pull the cord on the front under the seat cover until the ratchet
engages completely (1a).
or
CAUTION!
Risk of getting fingers caught
There is a risk of getting your fingers caught between
the parts of the shears.
ದ
Therefore never clasp the shears with your fingers.
1.
push forward the shears until the ratchet engages completely by
pressing the palm of your hand against the projecting part of the
shears (1b).
2.
Pull up the backrest at the push-handles until the ratchet bolts
engage in the lateral supports (2).
3.
If fitted, replace the backrest stabilization bar by swinging it
upwards and locating the spring pin in its hole, 3.4 Stabilizing bar
for the back (optional), page 9 .
7.3 Removing and fitting the rear wheels
WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use. This
can lead to overturning.
ದ
Always ensure that the removable axles are fully
engaged whenever you fit a wheel.
Removing the rear wheels
1.
Release the brakes.
2.
With one hand, hold the wheelchair upright.
3.
With the other, hold the wheel through the external spoke rim
around the wheel hub.
4.
Using your thumb, press the removable axle button
$
. Keep it
pressed and pull the wheel out of the adapter sleeve
%
.
26
1512598-B
