®
®
05
B. LCD Display :
1.
: Battery mark shows current residual battery power. Has
following 5 grades :
: battery is sufficient.
: battery is comparative sufficient.
: battery is nearly deficient.
: battery is nearly exhausted, need to have a replacement.
: battery is exhausted completely.
2.
LO :
Low frequency symbol. (10Hz~1kHz)
3. Measured value display.
4.
: Take the maximum value.
MAX
HOLD
E
º
6.
: Temperature unit display, “ºC” for the Celsius scale, “ºF” for
the Fahrenheit scale.
5. Temperature and maximum value display.
7.
: Value hold.
8.
2
mm/s :
When measuring acceleration, LCD will display
2
acceleration unit “m/s ”.
When measuring velocity, LCD will display velocity unit
2
“mm/s ”.
When measuring displacement, LCD will display
displacement unit “mm”.
9.
1KHz :
1KHz indication.
10.
HI :
High frequency symbol. (1kHz~15kHz)
LO
1KHz
HI
MAX
HOLD
2
mm/s
i888
. . .
i888
. . .
E
º
1
3
4
7
5
11
10
9
2
8
6
11.
: Backlight icon, the back light will be active for 7 seconds.
06
V. OPERATING INSTRUCTIONS :
This vibration meter is designed to fit the different measurement
requirements as follows :
1.
With Detector probe S :
It provides good
response and reproducibility over a wide range.
ON/
MEAS
ON/
MEAS
2.
With Detector head L :
Suitable for narrow object or
special objects to obtain quick response.
3.
With Magnetic probe :
Suitable for measurement in
cases where flat Ferric object to the stable
measurement.
ON/
MEAS
4.
Without probe tip :
In this condition, best high-range
response is achieved (10Hz to 15kHz), but planar
contact with the measurement object is required.
ON/
MEAS