Kusam-meco 286 SVD Operation Manual Download Page 5

04

05

The effect is best when the sensing side is facing 

high voltage is right angle (90 Deg.).  When it is 

worn at the inner side of arm or is covered by cloth,

the sensitivity is poor.

3.  Combination for attachment to chest pocket

CLEANING & REPLACING BATTERY

1.  Sensing side should be kept clean. The case may 
     be  cleaned  with  soft  fabric  and  mild detergent.
     No solvent or corrosive agent may be used.

2.  Replacing Battery

     (1)  When the sound becomes   weak, the battery 
           shall be replaced.

     (2)  Use coin to open battery cover and remove 
           used  battery.  Place new battery into slot with
           the battery positive (+) face up and fasten
           battery cover with coin.

CAUTIONS

1. This  instrument  is  an  auxiliary testing unit and is 

    only for obtaining warnings as additional protection. 

    Never   use   this   instrument   as   substitution  for 

    Tester.  Electrical  Test  shall  be  the prime electric

    testing instrument.

2. Other  than  affected by how you wear, the sensing

    and   warning   distance   may   be   influenced   by 

    direction  of  electric article,  ambient  environment, 

    shielding objects and weather conditions.  

3.  Buzzer  has  inner  water-proof film.  Do not pierce 

     it with sharp article.

4.  Do  not  store  this  instrument outdoor or inside of 

     car  for  long  time  to  avoid  direct  sunbeam  and 

     high temperature.

5.  The  instrument  shall  not be dropped or impacted

     heavily.  If  such  situation  does  happen,  perform 

     inspection  and  self-test   to   ensure   no  damage 

     occurred before using again.

6.  If  the  instrument  is rinsed by rain, remove battery

     and place it at cool place for natural dry.

Summary of Contents for 286 SVD








Reviews: