2
TERMS IN THIS MANUAL
Warning :
Identifies conditions and actions
that could result in serious injury
or even death to the user.
Caution :
Identifies conditions and actions
that could cause damage or
malfunction in the instrument
WARNING:
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture. The meter is
intended only for indoor use.
To avoid electrical shock hazard, observe the proper
safety precautions when working with voltages above
60 VDC or 30 VAC rms. These voltage levels pose a
potential shock hazard to the user.
Keep your hands/ fingers behind the hand/finger
barriers (of the meter and the test leads) that indicate
the limits of safe access of the hand-held part during
measurement. Inspect test leads, connectors, and
probes for damaged insulation or exposed metal
before using the instrument. If any defects are found,
replace them immediately.
This Clamp-on meter is designed to apply around or
remove from uninsulated hazardous live conductors.
But still, individual protective equipment must be used
if hazardous live parts in the installation where
measurement is to be carried out could be accessible.
CAUTION :
Disconnect the test leads from the test points before
changing meter functions.
!
!
3
2)
CENELEC Directives
The instruments conform to CENELEC Low-
voltage directive 73/23/EEC and Electro
magnetic compatibility directive 89/336/EEC
Caution ! Risk of electric shock
!
Caution ! Refer to the explanation in this Manual
Application around and removal from
hazardous live conductors is permitted
INTERNATIONAL ELECTRICAL SYMBOLS