background image

23

KUSAM-MECO                                                                              Feb  2018

®

MUMBAI

TEST CERTIFICATE

VOLTAGE TESTER

This  Test  Certificate  warrantees  that 

the  product  has  been  inspected  and 

tested in accordance with the published 

specifications.

The instrument has been calibrated by 

using  equipment  which  has  already 

been calibrated to standards traceable 

to national standards.

MODEL NO. ___________

SERIAL NO. ___________

DATE: ___________

ISO 9001

REGISTERED

QC

PASS

KUSAM-MECO

WARRANTY

24

KUSAM-MECO                                                                              Feb  2018

Each  “KUSAM-MECO”  product  is  warranted  to  be  free 
from defects in material and workmanship under normal 
use  &  service.    The  warranty  period  is    one  year  (12 
months) and begins from the date of despatch of goods. In 
case any defect occurs in functioning of the instrument, 
under proper use, within the warranty period, the same will 
be rectified by us free of charges, provided the to and fro 
freight charges are borne by you. 

This warranty extends only to the original buyer or end-
user customer of a “KUSAM-MECO” authorized  dealer.

This  warranty  does  not  apply  for  damaged  Ic’s,  fuses, 
burnt  PCB’s,  disposable  batteries,  carrying  case,  test 
leads,  or  to  any  product  which  in  “KUSAM-MECO’s” 
opinion,  has  been  misused,  altered,  neglected, 
contaminated  or  damaged  by  accident  or  abnormal 
conditions of operation or handling.

“KUSAM-MECO”  authorized  dealer  shall  extend  this 
warranty  on  new  and  unused  products  to  end-user 
customers only but have no authority to extend a greater 
or different warranty on behalf of  “KUSAM-MECO”.

“KUSAM-MECO’s”  warranty  obligation  is  limited,  at 
option, free of charge repair, or replacement of a defective 
product  which  is  returned  to  a  “KUSAM-MECO” 
authorized service center within the warranty period.

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE 
REMEDY  AND  IS  IN  LIEU  OF  ALL  OTHER 
WARRANTIES,  EXPRESS  OR  IMPLIED,  INCLUDING 
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE.  “KUSAM  MECO”  SHALL  NOT  BE  LIABLE 
FOR  ANY  SPECIAL,  INDIRECT,  INCIDENTAL  OR 
C O N S E Q U E N T I A L  D A M A G E S   O R   L O S S E S ,  
INCLUDING  LOSS  OF  DATA,  ARISING  FROM  ANY 
CAUSE WHATSOEVER.

All transaction are subject to Mumbai Jurisdiction.

®

KM 69

181041412

Summary of Contents for 181041412















Reviews: