Kurzweil RE-110, Owner'S Manual

Page: 21 / 32

20 Function Button
Local Control is the connection between the keyboard of the RE-110 and the internal sound-
producing circuitry of the instrument. Normally, Local Control is ON; in fact, every time you
power-up the RE-110, it automatically sets to Local Control ON, so you can play the keyboard
and hear the sounds of the instrument. But, there are reasons for setting Local Control to OFF
especially when MIDI Out of the RE-110 is connected to feed back to the instrument's MIDI
In port. One example of this is when using an external sequencer whose MIDI In port is
connected to MIDI Out of the RE-110 and whose MIDI Out port is connected to MIDI In of
the RE-110. In such a case, you can eliminate the
doubling of notes by setting Local Control to OFF.
While holding down the Function button, press
the key G7 or A7 to set Local Control. See Page
22 for more about your RE-110's MIDI features
LOCAL CONTROL
RESET
Key Reset Value
C8
Voice
Reverb Type
Reverb Wet/Dry
Chorus Wet/Dry
Upper Voice
Lower Voice
Split Point
Upper Octave
Lower Octave
Touch
Tune
Transpose
MIDI Receive Channel
MIDI Transmit Channel
Local Control Grand Piano 1
Room
10
0
Grand Piano 1
Fast Strings 1
F#3
0
0
Normal
0 (440Hz)
0
1
1
On
Key Local Control
G7 ON(Default)
A7 OFF
Since the RE-110 does not have a display, it is hard to know the current settings. If you get
confused or want to restore the default settings, just hold down the
Function button then press
and release the C8 key. After doing this, all of the settings will be reset as the table below.
All manuals and user guides at all-guides.com
all-guides.com