Kurzweil Forte 7 Musician'S Manual Download

Page: 70 / 244

Program Mode

Selecting Programs

6-5

NOTE : The display can be changed to an alternate layout by

pressing the “VIEW” soft button, or changing the “Display”

parameter in Global Mode.

Pop-Up Messages

Some actions cause the display to show pop-up messages. After a short time the display

returns to show the current Program.

MIDI In/Out Activity Indicators

MIDI In/Out activity indicators are displayed at the top of the screen (shown as 2 MIDI

port symbols with “I” for “in” and “O” for “out”). These indicators briefly light up when

MIDI has been recently sent to or received by the Forte’s MIDI/USB ports. If the symbol is

green, this indicates there has been MIDI activity on that port in the last few seconds. If the

symbol is red, this indicates there has been communication with the external software editor

on that port in the last few seconds. If the symbol is grey, this indicates there has been no

MIDI activity on that port in the last few seconds.

Alpha Wheel & Previous (–) and Next (+) Value Buttons

Use the Alpha Wheel or the Previous (-) and Next (+) buttons, to the right of the display below

the Alpha Wheel, to change the current Program. Turning the Alpha Wheel counter-clockwise

or pressing the Previous button will select the previous Program and turning the Alpha Wheel

clockwise or pressing the Next button will select the next Program.

Summary of Contents for Forte 7





















































































































































































































































Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands

Kurzweil Forte 7, Musician'S Manual

Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands