Kurzweil Forte 7 Musician'S Manual Download

Page: 209 / 244

Physical Specifications

B-1

Appendix B

Physical

Specifications

Keyboard:

88-key, fully-weighted hammer-action with velocity and pressure (After Touch) sensitive

adjustable keys. 88-key model uses Fatar TP/40L with pressure.

Display:

480 x 272 pixel high resolution color LCD with front-panel brightness adjust.

Polyphony:

128 Voice Polyphony, dynamically allocated.

Multitimbral:

16 parts (one per MIDI channel).

Quick Split / Layer:

Easy access with adjustable volume and panning.

Programs:

321 Factory plus 1024 User Programs.

Multis:

186 Factory Multis, plus 1024 User Multi locations with 4 programmable zones for splits and layers.

Effects:

Hundreds of complex effect chains, incorporated into programs.

Chains are not editable, but insert and aux chains can be selected.

Controllers:

• Pitch wheel

• Modulation wheel

• Volume Slider

• 9 front panel sliders with LED ladders

• 9 switches (assignable / zone mutes / KB3 control)

• 1 Variation switch

• 1 Tap Tempo switch

• 5 Master EQ/Compressor Knobs

• 2 EQ/Compressor On/Off Switches

• 3 switch pedal inputs, each supporting single switch pedal or single half damper pedal.

• 2 continuous control pedal inputs

• 2 Transpose buttons

Analog Outputs:

Four 1/4” TRS Balanced Outputs (Two Stereo Pairs, A & B)

24-bit D-to-A Converters

Frequency Response 20Hz-20kHz +/- 0.1dB

+21dBu Maximum Output Level

-113dB Signal-to-Noise Ratio (A-weighted)

0.003% THD+N (1kHz @ -1 dBFS)

Headphones:

1/4” Front-Mounted Stereo Headphone Output

Frequency Response 20Hz-20kHz +/- 0.5dB

Maximum Output Power 130mW into 32 Ohms

-100dB Signal-to-Noise Ratio (A-weighted)

0.03% THD+N (1kHz @ 100mW Output into 32 Ohm Load)

Output Impedance: < 1 Ohms

Load Impedance: > 24 Ohms

MIDI:

IN, THRU (Switchable to OUT), OUT

USB:

Complete MIDI functionality over USB

User Program / Multi file transfer to/from

PC / Mac / Tablet/ USB Flash Drives.

Operating System updates from PC / Mac / USB Flash Drive

Height:

FORTE 5.5” (14 cm) FORTE7: 5.5” (14 cm)

Depth:

FORTE 15.5” (39.5 cm) FORTE7: 15.6” (39.7 cm)

Length:

FORTE 54.5” (138.5 cm) FORTE7: 43.2” (109.7cm)

Weight:

FORTE: 48 lbs (21.77 kg) FORTE7: 41.45 lbs (18.8 kg)

Power:

Internal switch-mode power supply 100-240 VAC, 50/60 Hz, 300mA (20W max)

Specifications subject to change without notice

Summary of Contents for Forte 7





















































































































































































































































Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands

Kurzweil Forte 7, Musician'S Manual

Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands