Program Edit Mode
Program Pages
7-11
For both Bend parameters, positive values will cause the pitch to bend up, while negative
values will cause the pitch to bend down. Large positive values can cause samples to bend to
their maximum upward pitch shift before the Pitch Wheel is fully up (or down). This will
not happen when bending the pitch down.
Output Gain
Adjusts the output level of the currently selected program by up to -96 dB or +20 dB.
Category
This parameter sets the category that the program will be grouped into when you press one of
the Category buttons from the Program mode main page.
For example, if you were to edit a program in the Leads category that you want to use
primarily as a Synth Bass, you could make it appear in the Syn Bass category by changing this
parameter to SynBass. Set a category by using the Alpha Wheel or -/+ buttons. In addition to
the category set here, all edited programs can be viewed by pressing the User button.
Intonation Map
The Intonation Map parameter works just like the Global mode Intonation Map parameter,
except the Intonation Map parameter on the Program Common page only applies to the
current program. (The Global mode Intonation Map parameter applies to all programs.) The
Intonation Map parameter on the Program Common page allows you to set a different map
for each program. When the Global mode User Type parameter is set to Advanced, you can
edit the currently selected map and save it as a user map by pressing the Favorite 1 button.
See “Intonation Map” on page 10-8 for more details on intonation maps.
