Fig. 1-A
Fig. 1-C
Fig. 1-B
Insert the fabric into the channel on each
length of frame pipe. There are 2 long
sides and 2 short sides for each nest.
See Fig 1-A
(1)
TOP
NEST
A
(1)
TOP
NEST
B
NEST
Type
C
NOTE: TIGHTEN PROPERLY
Correct tightening will leave end of bolt
flush with the nuts’ white nylon locking
material.
INSUFFICIENT OR OVER
TIGHTENING OF THE CORNERS MAY
RESULT IN CRACKING.
For each of the remaining Nests Type C,
assemble each corner combining 2 bottom
corner pieces with 2 panhead screws.
See Fig 1-C
Assemble (1)
Top Nest B using
2 top & bottom
corners with 4
flat top machine
screws (Fig 1-B)
on one side. On
the remaining 2
corners connect
2 bottom corners
with 2 panhead
screws.
See Fig 1-C.
Assemble (1)
Top Nest A
using 4 top
corners, 4
bottom corners
and 8 flat top
machine
screws.
See Fig 1-B
Step 1. Assemble the Nests
