background image

Instructions for assembly

GB

27

Instructions for assembly

Note

The KÜPPERSBUSCH hob may only be built-in in accord-
ance to the instructions included in this manual: In the case 
of failure to observe these instructions, KÜPPERSBUSCH 
shall decline any liability and the approved marks of con-
formity will become invalid!

Safety instructions for kitchen unit fitters

• Ensure that all live connections are safely insulated when

installing the hob.

• The clearance between the hob and an extraction hood must

be at least as large as that stipulated in the assembly instruc-
tions for the cooker hood.

• The packaging materials (plastic foil, polystyrene, nails etc.)

must be kept out of reach of children as these parts are poten-
tially dangerous. Small parts can be swallowed and there is a
danger of plastic sheeting causing suffocation.

Installation

• To avoid danger of fire, make sure that no combustible objects

which could easily catch fire or become deformed on exposure
to heat are placed directly next to or above the hob.  

Note
The hob must be properly installed and connected!

Electrical connection

• Make sure that the local mains voltage is the same as the

voltage on the rating label. 

• The induction hob has been fitted with a temperature-resistant

connection cable in the factory.

• The connection cable must be at least H05 RR-F.
• If damaged, the manufacturer or his customer service must

replace the connection cable installed with a special
connection cable.

Power supply

Mains voltage: 220 - 240V~, 50-60 Hz
Component rated voltage: 230 - 240V

Technical data

* Power when the power boost function is activated

Start of operation

Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.

Important: No items may be on the touch control sensor keys
when the appliance is being connected!  

Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.

e.g.

e.g.

Dimensions

Hob height/ width/ depth

 mm 50 x 383 x 962

Cooking zones

rear

 Ø cm / kW

front

 Ø cm / kW

21/ 2.3 (3.2)*
14.5/ 1.4 (1.8)*

Hob, total

 kW 3.7

Summary of Contents for MKI 3820.0EM














Reviews: