manualshive.com logo in svg

Küppersbusch IKEF329-0, User Manual

Share
Download
Küppersbusch IKEF329-0 User Manual Download Page 10

Problem

Possible cause

Solution

 

The appliance has no power.
There is no voltage in the mains
socket.

Connect a different electrical ap-
pliance to the mains socket.
Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

 

The lamp is defective.

Refer to "Replacing the lamp".

The Pilot light flashes.

The appliance is not working
properly.

Contact a qualified electrician.

The compressor oper-
ates continually.

The temperature is not set cor-
rectly.

Set a higher temperature.

 

The door is not closed correctly.

Refer to "Closing the door".

 

The door has been opened too
frequently.

Do not keep the door open longer
than necessary.

 

The product temperature is too
high.

Let the product temperature de-
crease to room temperature be-
fore storage.

 

The room temperature is too
high.

Decrease the room temperature.

The compressor does
not start immediately af-
ter pressing the Super-
cool button, or after
changing the tempera-
ture.

The compressor starts after a
period of time.

This is correct.

Water flows on the rear
plate of the refrigerator.

During the automatic defrosting
process, frost defrosts on the
rear plate.

This is correct.

Temperature cannot be
set .

Supercool function switched on.

Switch off Supercool manually, or
wait to set the temperature until
the function has reset automati-
cally. Refer to "Supercool func-
tion".

The temperature in the
appliance is too low/
high.

The temperature regulator is not
set correctly.

Set a higher/lower temperature.

 

The door is not closed correctly.

Refer to "Closing the door".

 

The product temperature is too
high.

Let the product temperature de-
crease to room temperature be-
fore storage.

 

Many products are stored at the
same time.

Store less products at the same
time.

The temperature in the
refrigerator is too high.

There is no cold air circulation in
the appliance.

Make sure that there is cold air
circulation in the appliance.

Replacing the lamp

1. Disconnect the mains plug from the

mains socket.

2. Press on the rear hook and at the same

time slide the lamp cover in the direction
of the arrow.

3. Replace the lamp with one of the same

power and specifically designed for
household appliances. (the maximum
power is shown on the light lamp cover)

4. Install the lamp cover by sliding it into its

original position.

 

21

Summary of Contents for IKEF329-0














Reviews:

No comments

Brands by name

Popular brands

Load more brands