background image

4. When defrosting is completed, dry the in-

terior thoroughly and keep the scraper for
future use.

5. Switch on the appliance.
6. After two or three hours, reload the pre-

viously removed food into the compart-
ment.

Warning!

 Never use sharp metal tools

to scrape off frost from the evaporator
as you could damage it.

Do not use a mechanical device or any
artificial means to speed up the thawing
process other than those recommended
by the manufacturer.
A temperature rise of the frozen food
packs, during defrosting, may shorten
their safe storage life.

Periods of non-operation

When the appliance is not in use for long pe-
riods, take the following precautions:

disconnect the appliance from elec-
tricity supply

• remove all food
• defrost 

10)

and clean the appliance and all

accessories

• leave the door/doors ajar to prevent un-

pleasant smells.

If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food
inside from spoiling in case of a power failure.

What to do if…

Warning!

 Before troubleshooting,

disconnect the mains plug from the
mains socket.
Only a qualified electrician or competent
person must do the troubleshooting that
is not in this manual.

Important!

 There are some sounds during

normal use (compressor, refrigerant
circulation).

Problem

Possible cause

Solution

The appliance does not
operate. The lamp does
not operate.

The appliance is switched off.

Switch on the appliance.

 

The mains plug is not connected
to the mains socket correctly.

Connect the mains plug to the
mains socket correctly.

 

The appliance has no power.
There is no voltage in the mains
socket.

Connect a different electrical appli-
ance to the mains socket.
Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

 

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates
continually.

The temperature is not set cor-
rectly.

Set a higher temperature.

 

The door is not closed correctly.

Refer to "Closing the door".

10) If foreseen.

 

 19

Summary of Contents for IKE326-0-2T-CN

















Reviews: