Küppersbusch IKD 976.1GE, Instructions For Use And Installation Instructions

Page: 7 / 10

20
Part 1 - INSTALLATION INSTRUCTIONS
4.6 - Fitting the canopy
a) Remove the three grease filters “ 8D ” by
applying pressure to the handles “ 8E ”.
b) If fitted, remove the charcoal filter “ 8C ”.
c) Position the canopy item “ 8A ” in line with
the holes of lower frame “ TI ” and secure
with 4 screws “ 8B ”. Note: No further
operation must be carried out without
having tightened the 4 screws “
8C ”.
During this operation, until at least one
screw “
8C ” has been tightened, slightly
support the canopy item to avoid
accidental movement.
d) Fit the directional grille “ 4E ” in slot “ 4D ”.
4.7 - Electrical connections
a) Remove cover “ 9B ” by removing the two
screws “ 9A ”.
b) Remove connector “ 9D ” and connect it to “ 9E ” from the
motor assembly.
c) Refit the cover “ 9B ” paying attention that the connector cable
is correctly positioned in slot “ 9C ”.
d) Once all the connections have been done, check correct
operation of:
- LIGHTS
- MOTOR START
- SPEED CHANGE
A08_Isola04
A
B
C
D
G
4
8
D
E
B
A
A
A08_Isola09
B
C
9
All manuals and user guides at all-guides.com